by Staff Writers
Tokyo, Japan (SPX) Mar 03, 2018
On February 26, 2018, Hayabusa2 saw its destination -asteroid Ryugu- for
the first time! The photographs were captured by the ONC-T (Optical
Navigation Camera - Telescopic) onboard the spacecraft. Images were
taken between noon JST on February 26th and 9:00am the following
morning, with about 300 shots taken in total.
Data for nine of these images were transmitted from the spacecraft on February 27th, allowing us to confirm that Ryugu had indeed been seen. The animation shows these nine consecutive frames.
Ryugu's brightneess from Hayabusa2 is about magnitude 9, which would be impossible to see with the naked eye but visible with the ONC-T. Looking at the image above, you can see how the position of the surrounding stars relative to Ryugu appears to change as Hayabusa2 moves towards the asteroid.
The distance between Ryugu and Hayabusa2 when the images were taken is about 1.3 million km. Ryugu as seen from Hayabusa2 is in the direction of the constellation Pisces.
Ryugu was photographed when the Sun, Hayabusa2 and Ryugu were almost in a line. This configuration can be seen in the figure below, which shows a snapshot of the header from the Hayabusa2 website on February 26, 2018, which continuously updates to show the position of Hayabusa2. If you were to stand on Ryugu, Hayabusa2 would be seen in the direction of the Sun.
Hayabusa2 is currently using its ion engine to make adjustments to its course. This makes it difficult to alter the orientation of the spacecraft.
However, at the alignment shown above, the ONC-T camera can image Ryugu without needing to make significant changes to the spacecraft's orientation. This made February 26th the perfect time to try and capture Ryugu's image with the ONC-T. From the data, Ryugu was observed to be exactly at the expected location based on Hayabusa2's estimated position.
This tells us that Hayabusa2 is flying on the planned course.
"Now that we see Ryugu, the Hayabusa2 project has shifted to the final preparation stage for arrival at the asteroid. There are no problems with the route towards Ryugu or the performance of the spacecraft, and we will be proceeding with maximum thrust," explains Project Manager, Yuichi Tsuda.
The remaining images will be transmitted back to Earth from the spacecraft and allow us to further confirm the asteroid and spacecraft location. Although we can currently see Ryugu only as a point, it is very exciting for the whole project team to catch sight of the destination!
The ONC-T was developed under collaboration between JAXA, the University of Tokyo, Kochi University, Rikkyo University, Nagoya University, Chiba Institute of Technology, Meiji University, The University of Aizu, the National Institute of Advanced Industrial Science and Technology (AIST).
Related Links Asteroid Explorer "Hayabusa2" Asteroid and Comet Mission News, Science and Technology
 Ryugu as imaged by Japan's Hayabusa2 asteroid explorer mission |
Data for nine of these images were transmitted from the spacecraft on February 27th, allowing us to confirm that Ryugu had indeed been seen. The animation shows these nine consecutive frames.
Ryugu's brightneess from Hayabusa2 is about magnitude 9, which would be impossible to see with the naked eye but visible with the ONC-T. Looking at the image above, you can see how the position of the surrounding stars relative to Ryugu appears to change as Hayabusa2 moves towards the asteroid.
The distance between Ryugu and Hayabusa2 when the images were taken is about 1.3 million km. Ryugu as seen from Hayabusa2 is in the direction of the constellation Pisces.
Ryugu was photographed when the Sun, Hayabusa2 and Ryugu were almost in a line. This configuration can be seen in the figure below, which shows a snapshot of the header from the Hayabusa2 website on February 26, 2018, which continuously updates to show the position of Hayabusa2. If you were to stand on Ryugu, Hayabusa2 would be seen in the direction of the Sun.
Hayabusa2 is currently using its ion engine to make adjustments to its course. This makes it difficult to alter the orientation of the spacecraft.
However, at the alignment shown above, the ONC-T camera can image Ryugu without needing to make significant changes to the spacecraft's orientation. This made February 26th the perfect time to try and capture Ryugu's image with the ONC-T. From the data, Ryugu was observed to be exactly at the expected location based on Hayabusa2's estimated position.
This tells us that Hayabusa2 is flying on the planned course.
"Now that we see Ryugu, the Hayabusa2 project has shifted to the final preparation stage for arrival at the asteroid. There are no problems with the route towards Ryugu or the performance of the spacecraft, and we will be proceeding with maximum thrust," explains Project Manager, Yuichi Tsuda.
The remaining images will be transmitted back to Earth from the spacecraft and allow us to further confirm the asteroid and spacecraft location. Although we can currently see Ryugu only as a point, it is very exciting for the whole project team to catch sight of the destination!
The ONC-T was developed under collaboration between JAXA, the University of Tokyo, Kochi University, Rikkyo University, Nagoya University, Chiba Institute of Technology, Meiji University, The University of Aizu, the National Institute of Advanced Industrial Science and Technology (AIST).
Related Links Asteroid Explorer "Hayabusa2" Asteroid and Comet Mission News, Science and Technology
